Brake Fluid

Brake Fluid About

Brake Fluid Dot 3/dot 4 

Product Description
 BRAKE FLUID is a premium quality, non-silicone, non-mineral/petroleum based, fully synthetic brake fluid designed for use in a wide range of brake and clutch applications.
BRAKE FLUID is a sensational requirement of a modern car
BRAKE FLUID is a high performance non-petroleum Brake & clutch fluid, suitable for all Hydraulic braking system like disc, drum, ABS & clutches etc
Application
DOT 3 BRAKE FLUID is recommended for re-fill or top-up of brake and clutch systems in passenger cars, 4WD's, motorcycles, light and heavy duty commercial vehicles, mining, construction and agricultural equipment that require a non-petroleum based DOT 3 brake & clutch hydraulic fluid.
DOT 3 BRAKE FLUID is suitable for use where the vehicle manufacturer specifies DOT 3 brake fluids.
DOT 3 BRAKE FLUID can be used for first fill or refilling a brake or clutch system. For best results, the system should always be flushed with Brake Fluid DOT 3 prior to first fill or before refilling the system.
CHARACTERISTICS
Quick response to pressure & pulses.
Resistant to evaporation at high temperature.
Resistant to the oxidation at high temperature.
Quality does not deteriorate by moisture absorption.
Possess maximum hydraulic efficiency & lubricity.
Comply international specification as per its specified standards
Absorbs less moisture at slow rate to maintain high vapor lock / boiling point for longer time.

SPECIFICATION OF BRAKE FLUID DOT-3

SPECIFICATION OF BRAKE FLUID DOT-4