Send SMS
+918068095418
Home » Products » Automotive Lubricants » Brake Fluid DOT 3/DOT 4

Brake Fluid DOT 3/DOT 4

Brake Fluid DOT 3/DOT 4
Brake Fluid DOT 3/DOT 4
Send Inquiry
Product Code : 22
Price And Quantity
  • Minimum Order Quantity
  • 20
  • Unit of Measure
  • Liter/Liters
  • Price Range
  • 100.00 - 500.00 INR
Product Description

Product Description
» BRAKE FLUID is a premium quality, non-silicone, non-mineral/petroleum based, fully synthetic brake fluid designed for use in a wide range of brake and clutch applications.
» BRAKE FLUID is a sensational requirement of a modern car
» BRAKE FLUID is a high performance non-petroleum Brake & clutch fluid, suitable for all Hydraulic braking system like disc, drum, ABS & clutches etc
Application
» DOT 3 BRAKE FLUID is recommended for re-fill or top-up of brake and clutch systems in passenger cars, 4WD's, motorcycles, light and heavy duty commercial vehicles, mining, construction and agricultural equipment that require a non-petroleum based DOT 3 brake & clutch hydraulic fluid.
» DOT 3 BRAKE FLUID is suitable for use where the vehicle manufacturer specifies DOT 3 brake fluids.
» DOT 3 BRAKE FLUID can be used for first fill or refilling a brake or clutch system. For best results, the system should always be flushed with Brake Fluid DOT 3 prior to first fill or before refilling the system.
CHARACTERISTICS
» Quick response to pressure & pulses.
» Resistant to evaporation at high temperature.
» Resistant to the oxidation at high temperature.
» Quality does not deteriorate by moisture absorption.
» Possess maximum hydraulic efficiency & lubricity.
» Comply international specification as per its specified standards
» Absorbs less moisture at slow rate to maintain high vapor lock / boiling point for longer time.

SPECIFICATION OF BRAKE FLUID DOT-3

#

TEST PARAMETERS

TEST METHOD

TYPICAL VALUES

Unit

1

Color

Visual / ASTM D 1500

W/W

----

2

Specific Gravity @ 29.5 °C

ASTM D 1298

1.0-1.1

g/ml.

3

Kinematic, Viscosity @ 40 °C

ASTM D 445

-----

Mm2/s.

4

Kinematic, Viscosity @ 100 °C

ASTM D 445

1.5-2.5 cSt

Mm2/s.

5

Flash Point °C

ASTM D 92

120°C

Deg. C.

6

Dry ERBP


220-240

Deg. C.

7

Wet ERBP


150- 160

----

8

PH


7.0-11.0

% wt.

SPECIFICATION OF BRAKE FLUID DOT-4

#

TEST PARAMETERS

TEST METHOD

RESULT

Unit

1

Color

Visual / ASTM D 1500

W/W

----

2

Specific Gravity @ 29.5 °C

ASTM D 1298

1.1-1.2

g/ml.

3

Kinematic, Viscosity @ 40 °C

ASTM D 445

-----

Mm2/s.

4

Kinematic, Viscosity @ 100 °C

ASTM D 445

1.5-2.5 cSt

Mm2/s.

5

Flash Point °C

ASTM D 92

120°C

Deg. C.

6

Dry ERBP


250-260

Deg. C.

7

Wet ERBP


160- 170

----

8

PH


7.0-11.0

% wt.

Trade Information
  • Supply Ability
  • 100 Per Week
  • Delivery Time
  • 3-5 Days

TRANSASIA PETROCHEM PVT. LTD.
X


Back to top